DESCRIPTION :

WELDMAN make special purpose Idler Shaft Slot Cutting machine, both type A & type B, is ideally suitable for slot cutting of the shaft of Idler. The operation is automatic except for loading and un-loading. Both ends of the shaft are machined at a time. Two shafts are held together and fed to the machine for better productivity by machining both the ends of two shafts simultaneously.

The job is held in position by hydraulic cylinder. After the job is held, the milling cutter moves in and cuts the shaft to the desired size. The machine is supplied with specially designed hydraulic power pack (without first fill of oil).

The sequence of operation will be as follow :

1. Set the job with respect to the cutter for slot A or slot B cutting.

2.Hold two shafts in position.

3.Put the set of rods in the machine, the end touching/pressing the stopper.

4. Press the Start switch, the job will get clamped by hydraulic cylinder.

5.The rotation of the cutter will start and at the same time, the cutting head will start moving in forward direction.

6. Slot type A or B, as per the requirement and setting, will be cut.

7.After completion of the cut, the head will move back.

8.The job to be declamped.

9.Unload the job and place new job in the position.

TECHNICAL SPECIFICATION :

Shaft Length, Max. :	2300 mm
Shaft Length, Min. :	220 mm
Shaft Diameter, Max. :	40 mm
Shaft Diameter, Min. :	20 mm
Milling Depth, Max. :	5 mm
Key Way for the Cutter :	Provided
Water Circulation Unit :	Provided
Motor for Heads :	5 HP, 2 nos.
Motor for Hydraulic Power Pack :	2 HP, 1 no.
Shaft groove and flat width :	6-35 mm
Hydraulic system working pressure :	1.5-4Mpa